Intempco Guided Wave Radar Level Transducer, LTR01
Images are representations only.

LTR01

Series: LTR01 Guided Wave Radar Level Transducer Brand: Intempco Controls, Inc
Price
Request a Quote
Stock
Call for Pricing & Availablility
Request Information

Intempco Guided Wave Radar Level Transducer, LTR01
  • Electronic Module - Isolated 4-20 mA (750 Ohms at 24 Vdc User Voltage Supply, 250 Ohms Internally Driven)
  • Enclosure - Aluminum 1/2" NPT (2) Conduit, NEMA 6
  • Certificates of Compliance - No Certificates of Compliance, for Non-Hazardous Areas
  • Process Connection - 1.5" NPT, 316 Stainless Steel
  • Probe Type - 316 Stainless Steel PTFE-Coated Rod
  • Probe Length - 1 Custom Probe Length in Inches
  • Options - Without Options

Specifications

Brand

Accuracy

  • ± 0.039” (± 1 mm) or 0.02 % of Measured Distance, whichever is Greatest

Approvals & Certifications

  • CE
  • CSA Class I, Div. 1

BSP Connection

  • 1-1/2” BSP Male

Cable Entry

  • 2 x 1/2” NPT Conduit Entries

Communication

  • RS-485 Modbus

Conduit Connection

  • M20

Consumption

  • Power: < 3 W at 24 Vdc

Diameter

  • PTFE Isolation Gasket: 4” (101.6 mm)

Electrical Connectors

  • M20 Cable Gland
  • M6 x 1 Set Screw - 4 mm Version
  • M8 x 1 Set Screw - 8 mm Version
  • Signal Wiring: Recommended Signal Output & Communications Output is Twisted Shielded Pairs, 20 to 18 AWG (0.517 to 0.823 mm²)

Enclosure, Body Material

  • Coated Epoxy Aluminum

Environmental Protection

  • IP67
  • NEMA 6

Flange Size - 1-1/2” (DN 40)

  • 1-1/2” (DN 40) - 150# ANSI

Gasket Material

  • PTFE

Gland Material

  • Cable Gland: Aluminum

Measuring Range

  • 0.87 to 65 feet (0.26 to 19.81 metres) with Min. Dielectric Constant of 1.0

Metric Connection

  • M8 x 1.25 Female, 0.78” (20 mm) Deep

NPT Connection

  • 1-1/2” NPT Male

Operating Pressure

  • psi: -14.5 to 580 (kPa: -100 to 4,000, bar: -1 to 40) - Max.

Operating Temperature

  • Electronics: -40° to 70° C (-40° to 158° F) - Max.
  • Process/Probe: -40° to 203° C (-40° to 398° F) - Max.
  • Process/Probe: -45.5° to 311.6° C (-50° to 593° F) - Max.

Operating Voltages

  • 12-30 Vdc (Residual Ripple No greater than 100 mV)

Output

  • Fail-safe: 3.8-20.2 mA
  • Signal: Isolated 4-20 mA (750 ohms at 24 Vdc User Voltage Supply, 250 ohms Internally Driven)

Pressure Range

  • bar: -0.99 to 39.99
  • kPa: -99.97 to 3,999
  • psi: -14.5 to 580

Process Connection Material

  • 316 Stainless Steel

Repeatability

  • ± 0.02” (0.5 mm)

Resolution

  • 0.0008”

Sensor, Probe Diameter

  • Rod Probe: 0.250” (6.35 mm)
  • Weighted Assembly: 0.75” (19 mm)
  • Wire Cable Probe: 0.195” (4.953 mm)

Sensor, Probe Length

  • Probe: 0 to 780” (0 to 19,812 mm)

Sensor, Probe Material

  • Probe: PTFE
  • Rod & Wire Cable Probe: 316 Stainless Steel

Temperature Effect

  • Ambient: ± 0.005”/K of Measured Value

Update Time

  • Update Interval: 100 Samples/second / Updated < 100 milliseconds

Documentation

Data Sheets

View Product Series

Similar SKUs

LFT01
LFT01
LFT01 Float Level Transmitter
Intempco Controls
Request a Quote
Call for Pricing & Availablility
LSA04
LSA04
LSA04 RF Capacitance Level Switch
Intempco Controls
Request a Quote
Call for Pricing & Availablility
LTX20 FUEL
LTX20 FUEL
LTX20 Fuel Continous Capacitance Level Transmitter
Intempco Controls
Request a Quote
Call for Pricing & Availablility
LTX20UL
LTX20UL
LTX20UL RF Capacitance Level Transmitter
Intempco Controls
Request a Quote
Call for Pricing & Availablility
LTX22
LTX22
LTX22 Capacitance Level Transmitter
Intempco Controls
Request a Quote
Call for Pricing & Availablility
LTX20 EX FUEL/OIL
LTX20 EX FUEL/OIL
LTX20 EX Fuel/Oil Capacitance Level Transmitter
Intempco Controls
Request a Quote
Call for Pricing & Availablility
LTX10
LTX10
LTX10 Sanitary Capacitance Level Transmitter
Intempco Controls
Request a Quote
Call for Pricing & Availablility
LFT42
LFT42
LFT42 Float Level Transmitter
Intempco Controls
Request a Quote
Call for Pricing & Availablility
show more