Images are representations only.
Price
Request a Quote
Stock
Call for Pricing & Availablility
Featuring TDR (Time Domain Reflectometry) technology, the LTR01 Guided Wave Radar level transmitter provides continuous level measurement in liquids, slurries, and solids up to 65 feet with isolated Analog output.
This innovative device has almost no installation restrictions - it can be mounted in small tanks, tall and narrow nozzles and it measures precisely even with difficult tank geometries or close to interfering structures.
The LTR01 is ideal for various types of processing and storage applications and has an exceptional performance in liquids with low reflectivity such as oils and hydrocarbons.
TDR technology is not affected by pressure, temperature, viscosity, vacuum, foam, and dust changes in dielectric constant or coating of the probe.
The LTR01 can measure virtually any product with a dielectric constant greater than 1.3.
The LTR01 ships pre-calibrated precisely for the customer’s application for quick installation and setup.
If the customer chooses to calibrate on their own in the field, the LTR01 settings may be configured via RS-485 Modbus communicator and its software.
Features- Revolutionary TDR (Time Domain Reflectometry) Technology
- Auto calibration to any dielectric
- Precise continuous level measurement
- Measures liquids, slurries, and solids
- Highly robust radar measurement due to a 4-wire design and innovative signal analysis and disturbance signal suppression
- Features RS-485 Modbus communication and LTR01 software
- Measures 0 to 65 feet (0 to 19.81 meters)
- Pre-calibrated from factory for easy installation
- High temperature applications
- Programmable fail safe mode
- Economically priced
Specifications
Brand
Accuracy
- ± 0.039” (± 1 mm) or 0.02 % of Measured Distance, whichever is Greatest
Approvals & Certifications
- CE
- CSA Class I, Div. 1
BSP Connection
- 1-1/2” BSP Male
Cable Entry
- 2 x 1/2” NPT Conduit Entries
Communication
- RS-485 Modbus
Conduit Connection
- M20
Consumption
- Power: < 3 W at 24 Vdc
Diameter
- PTFE Isolation Gasket: 4” (101.6 mm)
Electrical Connectors
- M20 Cable Gland
- M6 x 1 Set Screw - 4 mm Version
- M8 x 1 Set Screw - 8 mm Version
- Signal Wiring: Recommended Signal Output & Communications Output is Twisted Shielded Pairs, 20 to 18 AWG (0.517 to 0.823 mm²)
Enclosure, Body Material
- Coated Epoxy Aluminum
Environmental Protection
- IP67
- NEMA 6
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - 150# ANSI
Gasket Material
- PTFE
Gland Material
- Cable Gland: Aluminum
Measuring Range
- 0.87 to 65 feet (0.26 to 19.81 metres) with Min. Dielectric Constant of 1.0
Metric Connection
- M8 x 1.25 Female, 0.78” (20 mm) Deep
NPT Connection
- 1-1/2” NPT Male
Operating Pressure
- psi: -14.5 to 580 (kPa: -100 to 4,000, bar: -1 to 40) - Max.
Operating Temperature
- Electronics: -40° to 70° C (-40° to 158° F) - Max.
- Process/Probe: -40° to 203° C (-40° to 398° F) - Max.
- Process/Probe: -45.5° to 311.6° C (-50° to 593° F) - Max.
Operating Voltages
- 12-30 Vdc (Residual Ripple No greater than 100 mV)
Output
- Fail-safe: 3.8-20.2 mA
- Signal: Isolated 4-20 mA (750 ohms at 24 Vdc User Voltage Supply, 250 ohms Internally Driven)
Pressure Range
- bar: -0.99 to 39.99
- kPa: -99.97 to 3,999
- psi: -14.5 to 580
Process Connection Material
- 316 Stainless Steel
Repeatability
- ± 0.02” (0.5 mm)
Resolution
- 0.0008”
Sensor, Probe Diameter
- Rod Probe: 0.250” (6.35 mm)
- Weighted Assembly: 0.75” (19 mm)
- Wire Cable Probe: 0.195” (4.953 mm)
Sensor, Probe Length
- Probe: 0 to 780” (0 to 19,812 mm)
Sensor, Probe Material
- Probe: PTFE
- Rod & Wire Cable Probe: 316 Stainless Steel
Temperature Effect
- Ambient: ± 0.005”/K of Measured Value
Update Time
- Update Interval: 100 Samples/second / Updated < 100 milliseconds
- Chemicals
- Petrochemicals
- Cement
- Building Aggregates
- Energy
- Food & Beverages
- Oil & Gas
- Pharmaceutical
- Pulp & Paper
- Wastewater
