These intrinsically safe and nonincendive, loop-powered 1/8 DIN digital panel meters can be installed virtually anywhere to provide convenient and informative displays of any 4-20 mA signal.
One of the most convenient features of these instruments is their dual line display which is typically used to display the process variable on the 5-digit alphanumeric top line and the units or a tag on the 8-digit alphanumeric bottom line.
Another common setup is to display the input in one scale on the top line: such as feet and another scale on the bottom line: such as gallons.
Both of these lines use 14-segment, alphanumeric characters for clear indication of tags, units or alarm messages.
Features
1/8 DIN Loop-Powered Process Meters with NEMA 4X, IP65 Front
4-20 mA Input Displayed with ±0.02% FS Accuracy
1.5 Volt Drop - 4.5 Volt Drop with Backlight
0.7" / 17.8 mm 5 Alphanumeric Characters Top Display
0.4" / 10.2 mm 8 Alphanumeric Characters Bottom Display
Displays Level in Feet & Inches up to 999 Feet, 11 & 15/16 Inches
20-Segment Bargraph with Numeric Percent Indication, Optional
2 Open Collector Outputs Standard; Assignable to Pulse, Alarm, Timer, or Stopwatch
2 Optional Loop-Powered Solid-State Relays; Assignable to Alarm, Control, Timer, or Stopwatch
Stopwatch & Timer Functions to Drive Relays & Open Collectors
Optional Isolated 4-20 mA Analog Output
Relay Pump Alternation Based on Level and Runtime
Display Relay Runtime & Cycle Count via Relay Info Menu
Round Horizontal Tank Function; Just Enter Diameter & Length
32-Point Linearization, Square Root Extraction and Programmable Exponent Function
Free PC-Based MeterView XL USB Programming Software
Loop-Powered Backlight with Red Backlight for Alarm Conditions
Safe Area Operating Temperature Range: -40 to 167°F / -40 to 75°C
Conformal Coated PCBs for Dust & Humidity Protection
UL & C-UL 61010 Listed for Electrical Safety
UL & C-UL Listed as Intrinsically Safe and Nonincendive
Display may be programmed to turn red and flash a user-defined message on alarm condition
PD6603 & PD6607 only: Top line: 7-segment numeric, FT-IN
Bottom line: 14-segment alphanumeric
Operating Temperature Range
-40° to 75° C for Safe Area Products
-40° to 70° C for Hazardous Area Products
Storage Temperature Range
-40° to 85° C
Relative Humidity
0 to 90 % Non-condensing
Printed circuit boards are conformally coated
Connections
Removable screw terminals accept 12 to 22 AWG wire
Overall Dimensions
4.68”x 2.45”x 3.79”
119 mm x 62 mm x 96 mm
W x H x D
Weight
8.7 oz. / 247 g with option board
Warranty
3 Years Parts and Labor
Input
4-20 mA
Hazardous Area Approvals
ATEX: II 1G, Ex ia IIC T4 Ga, Ta = -40° C to +70° C Certificate Number: CML 17ATEX2015X
IECEx: Ex ia IIC T4 Ga, Tamb = -40° C to +70° C Certificate Number: IECEx CML 17.0008X
UL & C-UL Listed as Intrinsically Safe and Nonincendive: Class I, Div. 1, Groups A, B, C and D T4, Class I, Div. 2, Groups A, B, C and D T4 Ex ia IIC T4 (Canada), Class I Zone 0, Zone 1 AEx ia IIC T4 (U.S.) Class I Zone 2, Group IIC T4 (U.S.) PROCESS CONTROL EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS
UL & C-UL 61010 Listed for Electrical Safety and Type 4X Environmental: Standards for Safety: IEC 61010-1:2010 (3rd Edition), UL 61010-1, 3rd Edition, CAN/CSA C22.2 No. 61010-1-12, 3rd Edition, Additional Standards: UL 50E