Pneumatic Solenoid Valve - Heavy-Duty Poppet Valve Series

Brand: Parker - Fluid Control Division

These valves use the well proven poppet principle to give high flow rates with short valve travel. 

Both the 2/2 and 3/2 valves in the range are available in G⅜" and G½" post sizes, meaning that each actuator is available in four configurations. All valves are normally closed. 

The bodies are of block form construction for ease of mounting. 

Springs are stainless steel with internal seals made of nitrile rubber. 

The 2/2 body allows air in one direction only, 3/2 versions have the facility of exhausting air through the actuator unit. 

This exhaust vent is unthreaded on all valves except the pilot and solenoid types which allows the piping away of exhaust air. 

All mechanisms are spring returned.
Features
  • High Flow 
  • Harsh Environment Resistant 
  • Multiple Pilot Voltage

Specifications

Actuation

  • Solenoid Air Operated, Manual or Mechanical Operated

Approvals & Certifications

  • IP65

Body Material

  • Zinc Die Cast

Electrical Connectors

  • 22 mm: 3-Pin (DIN 43650 Form B)

Fieldbus Protocol

  • N/A

Input Supply Voltage

  • 12/24 Vdc, 12/24/120/240 Vac

Lubricant

  • Non-Lube

Maximum Flow (Q Maximum - L/min)

  • 3240 to 4500

Media

  • Air

Minimum Operating Pressure

  • 28 psig

Nominal Flow (Qn-L/min)

  • 1980 to 2580

Number of Ports

  • 2, 3

Number of Positions

  • 2

Overide Functionality

  • Non-Locking & Locking Manual Overrides

Port Size

  • ⅜”, ½”

Port Type

  • BSPP

Pressure Range

  • Vacuum to 150 psig (10 bar)

Seal Material

  • Nitrile

Temperature Range

  • -10°C to 80°C / -10°C to 50°C (Solenoid Operated)
  • 14°F to 176°F / 14°F to 122°F (Solenoid Operated)

  • Actuator Piloting
show more